omplete packaged skid systems include one or more Pressure Motive Pumps (PMPs) along with a vented receiver mounted on common base. The receiver initially collects the condensate prior to it flowing into the pump tank and temporarily stores the condensate during the PMPs’ discharge cycle when the pump tank is pressured with steam. The receiver and vent must be adequately sized to allow for proper flash steam separation without building up pressure inside the receiver. Higher condensate pressures and temperatures, or higher condensate loads require larger receiver and vent sizes. Duplex & Triplex Systems can be used for increased capacity or in the event of a single pump failure. All components of the system are properly sized and pre-piped together; requiring only four connections to be made in the field.

Pressure Motive Pumps (PMPs) are pressure driven pumps which return condensate back to the boiler room; normally using steam pressure as the motive force. PMPs can be supplied as individual pump units – which include a pump tank, the internal pump mechanism, and a set of inlet and outlet check valves – or as a packaged system which also includes the vented receiver mounted on a common base.

Electric Condensate Pumps Used for general condensate return or for boiler feed applications. Available in Simplex or Duplex configurations with several different receiver sizes available.