Vortex flowmeter for utility applications and energy management systems For liquids, (wet) gases, saturated and superheated steam (+240°C / +464°F) Integrated P+T measurement: direct output of mass, normalised flow, energy, gross/net heat Flange: DN15…300 / ½…12"; wafer version: max. DN100 / 4" 2-wire, 4…20 mA, HART®, FF, Profibus-PA

Vortex flowmeter for high temperature applications For liquids, gases and steam up to +427°C / +800°F Adaptive filtering and signal conditioning Flange: DN15…300 / ¾…12", max. PN160 / ASME 1500 lb; Sandwich version: max. DN200 / 8" 2-wire, 4…20 mA, HART®

NPS ½ˮ–6ˮ Sight Glasses are ideally suited as reliable flow indicators for virtually all existing process media in either liquid or even gaseous state.

½" – 6" SST Sight Glasses are ideally suited as reliable flow indicators for virtually all existing process media in either liquid or even gaseous state.

NPS ½ˮ–6ˮ SSP-T Sight Glasses are ideally suited as reliable flow indicators for virtually all existing process media in either liquid or even gaseous state.

NPS ½ˮ–6ˮ SSP-T Sight Glasses are ideally suited as reliable flow indicators for virtually all existing process media in either liquid or even gaseous state.

Enhanced signal conditioning circuitry provides excellent noise and spike immunity High stable and repeatable output with ±0.5% of rate accuracy Minimum process fluid conductivity requirement of 10μS/cm provides maximum applicability Electrode Status Diagnostic function diagnoses empty pipe condition or electrode scaling Available in wafer of flanged designs Both Integral and Remote configurations are available for maximum flexibility Detector sizes from 0.1″ to 8″ (2.5 to 200mm) are available

Flexible Digital Communications with HART, DE and Foundation Fieldbus Protocols Intuitive, versatile operator interface with large characters and back-lit LCD dispaly Optional I/O capability for dual range selection input, counter status output and many more! Excelent noise immunity for reliable process control Optional “Fast Response” model for short-run batch applications Averaging function for pulsating flow applications. MagneW™ is a trademark of Azbil Corporation

Exclusive high quality lining technology and a special “mirror’fiish” PFA lining offers higher anti-adhession properties than competitive models Lining uses only pure white PFA with no additives Lining is reinforced with stainless mesh and divetailed to flow body providing durablity and long service life in the most difficult applications Flanged detectors available in line sizes from 0.1 inch to 44 inch (2.5 to 1100mm) Wafer style detectors available in line sizes from 0.1 inch to 8 inch (2.5 to 200mm) Field-replaceable electrodes are avialable as standard feature on most models 0.1 in through 8 inch detectors feature all-welded stainless steel construction MagneW™ is a trademark of Azbil Corporation

Exclusive high quality lining technology and a special “mirror’fiish” PFA lining offers higher anti-adhession properties than competitive models Lining uses only pure white PFA with no additives Lining is reinforced with stainless mesh and divetailed to flow body providing durablity and long service life in the most difficult applications Flanged detectors available in line sizes from 0.1 inch to 16 inch (2.5 to 400mm) Wafer style detectors available in line sizes from 0.1 inch to 8 inch (2.5 to 200mm) Field-replaceable electrodes are avialable as standard feature on most models 0.1 in through 8 inch detectors feature all-welded stainless steel construction MagneW™ is a trademark of Azbil Corporation

Azbil multivariable flowmeters utilize three primary sensing elements –a vortex shedding velocity sensor, an RTD temperature sensor, and a solid-state pressure transducer–to measure the mass flow rate of gases, liquids and steam. Systems that use external process measurements to calculate mass flow may not provide adequate compensation for the fact that process conditions can change radically between the point of velocity measurement and the point where upstream or downstream pressure and temperature measurements are being made. Because the model AX22 multivariable flowmeter measures all of these parameters in a single location, it delivers a more accurate process measurement. Integrating multivariable output capability with a single line penetration also simplifies system complexity and helps reduce initial equipment cost, installation cost and maintenance costs. The product line is available with a wide range of options and meter configurations to meet your specific application requirements.

Azbil’s Model AX24 Multivariable Vortex Flowmeter offers accurate and reliable flow metering in a multivariable design. The multivariable design incorporates a high-accuracy velocity sensor, a precision platinum RTD temperature sensor, and a solid-state pressure transducer. The AX24 can deliver volumetric flow, mass flow, temperature, pressure, density, and energy (BTU) measurements from a single installed device. This drastically reduces complexity, equipment costs, and installation costs in comparison to installing multiple stand-alone instruments to arrive at the same process measurements.

Azbil multivariable flowmeters utilize three primary sensing elements – a vortex shedding velocity sensor, an RTD temperature sensor, and a solid-state pressure transducer – to measure the mass flow rate of gases, liquids and steam. Because the model AX23 is able to measure all process variables within a single device it provides exceptional accuracy, simplifies system design and reduces installation costs.

Quality Products & Sales manufactures Paddle, Universal and RTJ style orifice plates in virtually any material. All plates are inspected in a controlled environment to ensure that the bores meet or exceed AGA and ISA specifications.

High Pressure Hot Tap. This sensor can be installed under high pressure without shutting down the system. We have corrected the common problem of the single nut tightening, by using the heavy duty tie rods systems of tightening the packing gland. No extra tools needed. The Stainless Steel tie rods assure easy insertion or retraction.